- The following SAS program
is submitted:
data test;
set sasuser.employees;
if 2 le years_service le 10 then
amount = 1000;
else if years_service gt 10 then
amount = 2000;
else
amount = 0;
amount_per_year = years_service / amount;
run;
Which one of the following values does the variable AMOUNT_PER_YEAR contain if an employee has been with the company for
one year?
A. 0
B. 1000
C. 2000
D. . (missing numeric value)
- The contents of the raw
data file AMOUNT are listed below:
--------10-------20-------30
$1,234
The following SAS program is submitted:
data test;
infile 'amount';
input @1 salary 6.;
if _error_ then description = 'Problems';
else description = 'No Problems';
run;
Which one of the following is the value of the DESCRIPTION variable?
A. Problems
B. No Problems
C. ' ' (missing character value)
D. The value can not be determined as the program fails to execute due to errors.
- The contents of the raw
data file NAMENUM are listed below:
--------10-------20-------30
Joe xx
The following SAS program is submitted:
data test;
infile 'namenum';
input name $ number;
run;
Which one of the following is the value of the NUMBER variable?
A. xx
B. Joe
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
- The contents of the raw
data file AMOUNT are listed below:
--------10-------20-------30
$1,234
The following SAS program is submitted:
data test;
infile 'amount';
input @1 salary 6.;
run;
Which one of the following is the value of the SALARY variable?
A. 1234
B. 1,234
C. $1,234
D. . (missing numeric value)
- Which one of the following
statements is true regarding the SAS automatic _ERROR_ variable?
A. The _ERROR_ variable contains the values 'ON' or 'OFF'.
B. The _ERROR_ variable contains the values 'TRUE' or 'FALSE'.
C. The _ERROR_ variable is automatically stored in the resulting SAS data set.
D. The _ERROR_ variable can be used in expressions or calculations in the DATA step.
- Which one of the following
is true when SAS encounters a data error in a DATA step?
A. The DATA step stops executing at the point of the error, and no SAS data set is created.
B. A note is written to the SAS log explaining the error, and the DATA step continues to execute.
C. A note appears in the SAS log that the incorrect data record was saved to a separate SAS file for further examination.
D. The DATA step stops executing at the point of the error, and the resulting DATA set contains observations up to that point.
- The following SAS program
is submitted:
data work.totalsales (keep = monthsales{12} );
set work.monthlysales (keep = year product sales);
array monthsales {12} ;
do i=1 to 12;
monthsales{i} = sales;
end;
run;
The data set named WORK.MONTHLYSALES has one observation per month for each of five years for a total of 60 observations.
Which one of the following is the result of the above program?
A. The program fails execution due to data errors.
B. The program fails execution due to syntax errors.
C. The program executes with warnings and creates the WORK.TOTALSALES data set.
D. The program executes without errors or warnings and creates the WORK.TOTALSALES data set.
- The following SAS program
is submitted:
data work.totalsales;
set work.monthlysales(keep = year product sales);
retain monthsales {12} ;
array monthsales {12} ;
do i = 1 to 12;
monthsales{i} = sales;
end;
cnt + 1;
monthsales{cnt} = sales;
run;
The data set named WORK.MONTHLYSALES has one observation per month for each of five years for a total of 60 observations.
Which one of the following is the result of the above program?
A. The program fails execution due to data errors.
B. The program fails execution due to syntax errors.
C. The program runs with warnings and creates the WORK.TOTALSALES data set with 60 observations.
D. The program runs without errors or warnings and creates the WORK.TOTALSALES data set with 60 observations.
- The following SAS program
is submitted:
data work.january;
set work.allmonths (keep = product month num_sold cost);
if month = 'Jan' then output work.january;
sales = cost * num_sold;
keep = product sales;
run;
Which variables does the WORK.JANUARY data set contain?
A. PRODUCT and SALES only
B. PRODUCT, MONTH, NUM_SOLD and COST only
C. PRODUCT, SALES, MONTH, NUM_SOLD and COST only
D. An incomplete output data set is created due to syntax errors.
- The contents of the raw
data file CALENDAR are listed below:
--------10-------20-------30
01012000
The following SAS program is submitted:
data test;
infile 'calendar';
input @1 date mmddyy10.;
if date = '01012000'd then event = 'January 1st';
run;
Which one of the following is the value of the EVENT variable?
A. 01012000
B. January 1st
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
- A SAS program is submitted
and the following SAS log is produced:
2 data gt100;
3 set ia.airplanes
4 if mpg gt 100 then output;
22 202
ERROR: File WORK.IF.DATA does not exist.
ERROR: File WORK.MPG.DATA does not exist.
ERROR: File WORK.GT.DATA does not exist.
ERROR: File WORK.THEN.DATA does not exist.
ERROR: File WORK.OUTPUT.DATA does not exist.
ERROR 22-322: Syntax error, expecting one of the following: a name,
a quoted string, (, ;, END, KEY, KEYS, NOBS, OPEN, POINT, _DATA_, _LAST_, _NULL_.
ERROR 202-322: The option or parameter is not recognized and will be ignored.
5 run;
The IA libref was previously assigned in this SAS session.
Which one of the following corrects the errors in the LOG?
A. Delete the word THEN on the IF statement.
B. Add a semicolon at the end of the SET statement.
C. Place quotes around the value on the IF statement.
D. Add an END statement to conclude the IF statement.
- The contents of the raw
data file SIZE are listed below:
--------10-------20-------30
72 95
The following SAS program is submitted:
data test;
infile 'size';
input @1 height 2. @4 weight 2;
run;
Which one of the following is the value of the variable WEIGHT in the output data set?
A. 2
B. 72
C. 95
D. . (missing numeric value)
- A SAS PRINT procedure
output of the WORK.LEVELS data set is listed below:
Obs name level
1 Frank 1
2 Joan 2
3 Sui 2
4 Jose 3
5 Burt 4
6 Kelly .
7 Juan 1
The following SAS program is submitted:
data work.expertise;
set work.levels;
if level = . then
expertise = 'Unknown';
else if level = 1 then
expertise = 'Low';
else if level = 2 or 3 then
expertise = 'Medium';
else
expertise = 'High';
run;
Which of the following values does the variable EXPERTISE contain?
A. Low, Medium, and High only
B. Low, Medium, and Unknown only
C. Low, Medium, High, and Unknown only
D. Low, Medium, High, Unknown, and ' ' (missing character value)
- The contents of the raw
data file EMPLOYEE are listed below:
--------10-------20-------30
Ruth 39 11
Jose 32 22
Sue 30 33
John 40 44
The following SAS program is submitted:
data test;
infile 'employee';
input employee_name $ 1-4;
if employee_name = 'Ruth' then input idnum 10-11;
else input age 7-8;
run;
Which one of the following values does the variable IDNUM contain when the name of the employee is "Ruth"?
A. 11
B. 22
C. 32
D. . (missing numeric value)
- The contents of the raw
data file EMPLOYEE are listed below:
--------10-------20-------30
Ruth 39 11
Jose 32 22
Sue 30 33
John 40 44
The following SAS program is submitted:
data test;
infile 'employee';
input employee_name $ 1-4;
if employee_name = 'Sue' then input age 7-8;
else input idnum 10-11;
run;
Which one of the following values does the variable AGE contain when the name of the employee is "Sue"?
A. 30
B. 33
C. 40
D. . (missing numeric value)
- The following SAS program
is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'Chem2'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
chem2
Which one of the following values does the variable DESCRIPTION contain?
A. Chem2
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
- The following SAS program
is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'chem3'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
CHEM3
Which one of the following values does the variable DESCRIPTION contain?
A. chem3
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
- Which one of the following
ODS statement options terminates output being written to an HTML file?
A. END
B. QUIT
C. STOP
D. CLOSE
- The following SAS program
is submitted:
proc means data = sasuser.shoes;
where product in ('Sandal' , 'Slipper' , 'Boot');
run;
Which one of the following ODS statements completes the program and sends the report to an HTML file?
A. ods html = 'sales.html';
B. ods file = 'sales.html';
C. ods file html = 'sales.html';
D. ods html file = 'sales.html';
- The following SAS program
is submitted:
proc format;
value score 1 - 50 = 'Fail'
51 - 100 = 'Pass';
run;
proc report data = work.courses nowd;
column exam;
define exam / display format = score.;
run;
The variable EXAM has a value of 50.5.
How will the EXAM variable value be displayed in the REPORT procedure output?
A. Fail
B. Pass
C. 50.5
D. . (missing numeric value)
- The following SAS program
is submitted:
options pageno = 1;
proc print data = sasuser.houses;
run;
proc means data = sasuser.shoes;
run;
The report created by the PRINT procedure step generates 5 pages of output.
What is the page number on the first page of the report generated by the MEANS procedure step?
A. 1
B. 2
C. 5
D. 6
- Which one of the following
SAS system options displays the time on a report?
A. TIME
B. DATE
C. TODAY
D. DATETIME
Ans: b
- Which one of the following
SAS system options prevents the page number from appearing on a report?
A. NONUM
B. NOPAGE
C. NONUMBER
D. NOPAGENUM
- The following SAS program
is submitted:
footnote1 'Sales Report for Last Month';
footnote2 'Selected Products Only';
footnote3 'All Regions';
footnote4 'All Figures in Thousands of Dollars';
proc print data = sasuser.shoes;
footnote2 'All Products';
run;
Which one of the following contains the footnote text that is displayed in the report?
A. All Products
B. Sales Report for Last Month
All Products
C. All Products
All Regions
All Figures in Thousands of Dollars
D. Sales Report for Last Month
All Products
All Regions
All Figures in Thousands of Dollars
- The following SAS program
is submitted:
proc means data = sasuser.houses std mean max;
var sqfeet;
run;
Which one of the following is needed to display the standard deviation with only two decimal places?
A. Add the option MAXDEC = 2 to the MEANS procedure statement.
B. Add the statement MAXDEC = 7.2; in the MEANS procedure step.
C. Add the statement FORMAT STD 7.2; in the MEANS procedure step.
D. Add the option FORMAT = 7.2 option to the MEANS procedure statement.
- Unless specified, which
variables and data values are used to calculate statistics in the MEANS
procedure?
A. non-missing numeric variable values only
B. missing numeric variable values and non-missing numeric variable values only
C. non-missing character variables and non-missing numeric variable values only
D. missing character variables, non-missing character variables, missing numeric variable values, and non-missing numeric variable
values
- The following SAS program is submitted:
proc sort data = sasuser.houses out = houses;
by style;
run;
proc print data = houses;
run;
Click on the Exhibit button to view the report produced.
style bedrooms baths price
CONDO 2 1.5 80050
3 2.5 79350
4 2.5 127150
2 2.0 110700
RANCH 2 1.0 64000
3 3.0 86650
3 1.0 89100
1 1.0 34550
SPLIT 1 1.0 65850
4 3.0 94450
3 1.5 73650
TWOSTORY 4 3.0 107250
2 1.0 55850
2 1.0 69250
4 2.5 102950
Which of the following SAS statement(s) create(s) the report?
A. id style;
B. id style;
var style bedrooms baths price;
C. id style;
by style;
var bedrooms baths price;
D. id style;
by style;
var style bedrooms baths price;
- A realtor has two
customers. One customer wants to view a list of homes selling for less
than $60,000. The other customer wants
to view a list of homes selling for greater than $100,000.
Assuming the PRICE variable is numeric, which one of the following PRINT procedure steps will select all desired observations?
A. proc print data = sasuser.houses;
where price lt 60000;
where price gt 100000;
run;
B. proc print data = sasuser.houses;
where price lt 60000 or price gt 100000;
run;
C. proc print data = sasuser.houses;
where price lt 60000 and price gt 100000;
run;
D. proc print data = sasuser.houses;
where price lt 60000 or where price gt 100000;
run;
- The value 110700 is stored
in a numeric variable.
Which one of the following SAS formats is used to display the value as $110,700.00 in a report?
A. comma8.2
B. comma11.2
C. dollar8.2
D. dollar11.2
- The SAS data set
SASUSER.HOUSES contains a variable PRICE which has been assigned a
permanent label of "Asking Price".
Which one of the following SAS programs temporarily replaces the label "Asking Price" with the label "Sale Price" in the output?
A. proc print data = sasuser.houses;
label price = "Sale Price";
run;
B. proc print data = sasuser.houses label;
label price "Sale Price";
run;
C. proc print data = sasuser.houses label;
label price = "Sale Price";
run;
D. proc print data = sasuser.houses label = "Sale Price";
run;
- The SAS data set BANKS is
listed below:
BANKS
name rate
FirstCapital 0.0718
DirectBank 0.0721
VirtualDirect 0.0728
The following SAS program is submitted:
data newbank;
do year = 1 to 3;
set banks;
capital + 5000;
end;
run;
Which one of the following represents how many observations and variables will exist in the SAS data set NEWBANK?
A. 0 observations and 0 variables
B. 1 observations and 4 variables
C. 3 observations and 3 variables
D. 9 observations and 2 variables
- The following SAS program
is submitted:
data work.clients;
calls = 6;
do while (calls le 6);
calls + 1;
end;
run;
Which one of the following is the value of the variable CALLS in the output data set?
A. 4
B. 5
C. 6
D. 7
- The following SAS program
is submitted:
data work.pieces;
do while (n lt 6);
n + 1;
end;
run;
Which one of the following is the value of the variable N in the output data set?
A. 4
B. 5
C. 6
D. 7
- The following SAS program
is submitted:
data work.sales;
do year = 1 to 5;
do month = 1 to 12;
x + 1;
end;
end;
run;
Which one of the following represents how many observations are written to the WORK.SALES data set?
A. 0
B. 1
C. 5
D. 60
- A raw data record is
listed below:
--------10-------20-------30
1999/10/25
The following SAS program is submitted:
data projectduration;
infile 'file-specification';
input date $ 1 - 10;
run;
Which one of the following statements completes the program above and computes the duration of the project in days as of today's
date?
A. duration = today( ) - put(date,ddmmyy10.);
B. duration = today( ) - put(date,yymmdd10.);
C. duration = today( ) - input(date,ddmmyy10.);
D. duration = today( ) - input(date,yymmdd10.);
- A raw data record is
listed below:
--------10-------20-------30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750' for the DEPARTMENT
variable?
A. department = trim(dept) number;
B. department = dept input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.);
- The following SAS program
is submitted:
data work.month;
date = put('13mar2000'd,ddmmyy10.);
run;
Which one of the following represents the type and length of the variable DATE in the output data set?
A. numeric, 8 bytes
B. numeric, 10 bytes
C. character, 8 bytes
D. character, 10 bytes
- The following SAS program
is submitted:
data work.products;
Product_Number = 5461;
Item = '1001';
Item_Reference = Item'/'Product_Number;
run;
Which one of the following is the value of the variable ITEM_REFERENCE in the output data set?
A. 1001/5461
B. 1001/ 5461
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
- The following SAS program
is submitted:
data work.retail;
cost = '20000';
total = .10 * cost;
run;
Which one of the following is the value of the variable TOTAL in the output data set?
A. 2000
B. '2000'
C. . (missing numeric value)
D. ' ' (missing character value)
- Which one of the following
SAS statements correctly computes the average of four numerical values?
A. average = mean(num1 - num4);
B. average = mean(of num1 - num4);
C. average = mean(of num1 to num4);
D. average = mean(num1 num2 num3 num4);
- The following SAS program
is submitted:
data work.test;
Author = 'Agatha Christie';
First = substr(scan(author,1,' ,'),1,1);
run;
Which one of the following is the length of the variable FIRST in the output data set?
A. 1
B. 6
C. 15
D. 200
- The following SAS program is submitted:
data work.test;
Author = 'Christie, Agatha';
First = substr(scan(author,2,' ,'),1,1);
run;
Which one of the following is the value of the variable FIRST in the output data set?
A. A
B. C
C. Agatha
D. ' ' (missing character value)
- The following SAS program
is submitted:
data work.test;
Title = 'A Tale of Two Cities, Charles J. Dickens';
Word = scan(title,3,' ,');
run;
Which one of the following is the value of the variable WORD in the output data set?
A. T
B. of
C. Dickens
D. ' ' (missing character value)
- The following SAS program
is submitted:
data work.test;
First = 'Ipswich, England';
City_Country = substr(First,1,7)!!', '!!'England';
run;
Which one of the following is the length of the variable CITY_COUNTRY in the output data set?
A. 6
B. 7
C. 17
D. 25
- The following SAS program
is submitted:
data work.test;
First = 'Ipswich, England';
City = substr(First,1,7);
City_Country = City!!', '!!'England';
run;
Which one of the following is the value of the variable CITY_COUNTRY in the output data set?
A. Ipswich!!
B. Ipswich, England
C. Ipswich, 'England'
D. Ipswich , England
- Which one of the following
is true of the RETAIN statement in a SAS DATA step program?
A. It can be used to assign an initial value to _N_ .
B. It is only valid in conjunction with a SUM function.
C. It has no effect on variables read with the SET, MERGE and UPDATE statements.
D. It adds the value of an expression to an accumulator variable and ignores missing values.
Ans: c or d
- A raw data file is listed
below:
--------10-------20-------30
1901 2
1905 1
1910 6
1925 .
1941 1
The following SAS program is submitted and references the raw data file above:
data coins;
infile 'file-specification';
input year quantity;
run;
Which one of the following completes the program and produces a non-missing value for the variable TOTQUANTITY in the last
observation of the output data set?
A. totquantity + quantity;
B. totquantity = sum(totquantity + quantity);
C. totquantity 0;
sum totquantity;
D. retain totquantity 0;
totquantity = totquantity + quantity;
- A raw data file is listed
below:
--------10-------20-------30
squash 1.10
apples 2.25
juice 1.69
The following SAS program is submitted using the raw data file above:
data groceries;
infile 'file-specification';
input item $ cost;
run;
Which one of the following completes the program and produces a grand total for all COST values?
A. grandtot = sum cost;
B. grandtot = sum(grandtot,cost);
C. retain grandtot 0;
grandtot = sum(grandtot,cost);
D. grandtot = sum(grandtot,cost);
output grandtot;
- The following SAS program
is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set WORK.SALARY, currently ordered by DEPARTMENT, contains 100 observations for each of 5 departments.
Which one of the following represents how many observations the WORK.TOTAL data set contains?
A. 5
B. 20
C. 100
D. 500
- The following SAS program
is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set named WORK.SALARY contains 10 observations for each department, currently ordered by DEPARTMENT.
Which one of the following is true regarding the program above?
A. The BY statement in the DATA step causes a syntax error.
B. FIRST.DEPARTMENT and LAST.DEPARTMENT are variables in the WORK.TOTAL data set.
C. The values of the variable PAYROLL represent the total for each department in the WORK.SALARY data set.
D. The values of the variable PAYROLL represent a total for all values of WAGERATE in the WORK.SALARY data set.
- The following SAS program
is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists (keep = job_code);
if job_code = 'chem3'
then description = 'Senior Chemist';
run;
The variable JOB_CODE is a character variable with a length of 6 bytes.
Which one of the following is the length of the variable DESCRIPTION in the output data set?
A. 6 bytes
B. 8 bytes
C. 14 bytes
D. 200 bytes
- The
following SAS program is submitted:
data work.accounting;
set work.dept1 work.dept2;
run;
A character variable named JOBCODE is contained in both the WORK.DEPT1 and WORK.DEPT2 SAS data sets. The variable
JOBCODE has a length of 5 in the WORK.DEPT1 data set and a length of 7 in the WORK.DEPT2 data set.
Which one of the following is the length of the variable JOBCODE in the output data set?
A. 5
B. 7
C. 8
D. 12
- The
following SAS DATA step is submitted:
data work.accounting;
set work.department;
length jobcode $ 12;
run;
The WORK.DEPARTMENT SAS data set contains a character variable named JOBCODE with a length of 5.
Which one of the following is the length of the variable JOBCODE in the output data set?
A. 5
B. 8
C. 12
D. The length can not be determined as the program fails to execute due to errors.
- Which
one of the following SAS statements renames two variables?
A. set work.dept1
work.dept2(rename = (jcode = jobcode)
(sal = salary));
B. set work.dept1
work.dept2(rename = (jcode = jobcode
sal = salary));
C. set work.dept1
work.dept2(rename = jcode = jobcode
sal = salary);
D. set work.dept1
work.dept2(rename = (jcode jobcode)
(sal salary));
Ans: b
- The
following SAS program is submitted:
data work.company;
set work.dept1(keep = jobcode)
work.dept2(rename = (jcode = jobcode));
run;
Which one of the following is the result?
A. The variable JCODE is written to the output data set.
B. The variable JOBCODE is written to the output data set.
C. Neither variable JCODE nor JOBCODE is written to the output data set.
D. The program fails to execute due to errors.
- The
following SAS program is submitted:
data work.passengers;
if OrigPassengers = . then
OrigPassengers = 100;
TransPassengers = 100;
OrigPassengers = .;
NonPaying = 10;
TotalPassengers = sum (OrigPassengers, TransPassengers);
run;
Which one of the following is the value of the TOTALPASSENGERS variable in the output data set?
A. 100
B. 110
C. 200
D. . (missing numeric value)
- The
following SAS program is submitted:
data work.staff;
JobCategory = 'FA';
JobLevel = '1';
JobCategory = JobCategory || JobLevel;
run;
Which one of the following is the value of the variable JOBCATEGORY in the output data set?
A. FA
B. FA1
C. FA 1
D. ' ' (missing character value)
- The
following SAS program is submitted:
data work.one;
x = 3;
y = 2;
z = x ** y;
run;
Which one of the following is the value of the variable Z in the output data set?
A. 6
B. 9
C. . (missing numeric value)
D. The program fails to execute due to errors.
- The
SAS data set named WORK.TEST is listed below:
capacity airplanetype staff
150 Large 10
Which one of the following SAS programs created this data set?
A. data work.test;
capacity = 150;
if 100 le capacity le 200 then
airplanetype = 'Large' and staff = 10;
else airplanetype = 'Small' and staff = 5;
run;
B. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
end;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
C. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
D. data work.test;
capacity = 150;
if 100 le capacity le 200 then;
airplanetype = 'Small';
staff = 5;
else;
airplanetype = 'Large';
staff = 10;
run;
- The
following SAS program is submitted:
data work.flights;
destination = 'cph';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise city = 'Other';
end;
run;
Which one of the following is the value of the CITY variable?
A. Other
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
- The
following SAS program is submitted:
data work.flights;
destination = 'CPH';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise;
end;
run;
Which one of the following is the value of the CITY variable?
A. London
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
- The following
SAS program is submitted:
data work.new;
length word $7;
amount = 4;
if amount = 4 then word = 'FOUR';
else if amount = 7 then word = 'SEVEN';
else word = 'NONE!!!';
amount = 7;
run;
Which one of the following represents the values of the AMOUNT and WORD variables?
A. amount word
7 FOUR
B. amount word
7 SEVEN
C. amount word
4 FOUR
D. amount word
4 ' ' (missing character value)
- The SAS data
set EMPLOYEE_INFO is listed below:
IDNumber Expenses
2542 100.00
3612 133.15
2198 234.34
2198 111.12
The following SAS program is submitted:
proc sort data = employee_info;
run;
Which one of the following BY statements completes the program and sorts the data sequentially by descending expense values within
each descending IDNUMBER value?
A. by descending IDNumber Expenses;
B. by (IDNumber Expenses) descending;
C. by IDNumber descending Expenses descending;
D. by descending IDNumber descending Expenses;
- The SAS data
set QTR1_REVENUE is listed below:
destination revenue
YYZ 53634
FRA 62129
FRA 75962
RDU 76254
YYZ 82174
The following SAS program is submitted:
proc sort data = qtr1_revenue;
by destination descending revenue;
run;
Which one of the following represents the first observation in the output data set?
A. destination revenue
YYZ 82174
B. destination revenue
YYZ 53634
C. destination revenue
FRA 62129
D. destination revenue
FRA 75962
- The following
SAS program is submitted:
libname company 'SAS-data-library';
proc sort data = company.payroll;
by EmployeeIDNumber;
run;
Write access has been granted to the COMPANY library.
Which one of the following represents how the observations are sorted?
A. COMPANY.PAYROLL is recreated in sorted order by EmployeeIDNumber.
B. COMPANY.PAYROLL is stored in original order, and a new data set PAYROLL is created in sorted order by
EmployeeIDNumber.
C. COMPANY.PAYROLL is stored in original order, and a new data set COMPANY.PAYROLLSORTED is created in sorted order
by EmployeeIDNumber.
D. COMPANY.PAYROLL is recreated in sorted order by EmployeeIDNumber, and a new data set PAYROLL is created in sorted
order by EmployeeIDNumber.
Ans: a
- The SAS data
set EMPLOYEE_INFO is listed below:
IDNumber Expenses
2542 100.00
3612 133.15
2198 234.34
2198 111.12
The following SAS program is submitted:
proc sort data = employee_info;
run;
Which one of the following BY statements completes the program and sorts the data sequentially by ascending expense values within
each ascending IDNUMBER value?
A. by Expenses IDNumber;
B. by IDNumber Expenses;
C. by ascending (IDNumber Expenses);
D. by ascending IDNumber ascending Expenses;
- The SAS data
set WORK.AWARDS is listed below:
fname points
Amy 2
Amy 1
Gerard 3
Wang 3
Wang 1
Wang 2
The following SAS program is submitted:
proc sort data = work.awards;
by descending fname points;
run;
Which one of the following represents how the observations are sorted?
A. Wang 3
Gerard 3
Wang 2
Amy 2
Wang 1
Amy 1
B. Wang 3
Wang 2
Wang 1
Gerard 3
Amy 2
Amy 1
C. Wang 3
Wang 1
Wang 2
Gerard 3
Amy 2
Amy 1
D. Wang 1
Wang 2
Wang 3
Gerard 3
Amy 1
Amy 2
- The
observations in the SAS data set WORK.TEST are ordered by the values of the
variable NAME.
The following SAS program is submitted:
proc sort data = work.test out = work.testsorted;
by name;
run;
Which one of the following is the result of the SAS program?
A. The data set WORK.TEST is stored in ascending order by values of the NAME variable.
B. The data set WORK.TEST is stored in descending order by values of the NAME variable.
C. The data set WORK.TESTSORTED is stored in ascending order by values of the NAME variable.
D. The data set WORK.TESTSORTED is stored in descending order by values of the NAME variable.
- Which one of
the following statements is true regarding the name of a SAS array?
A. It is saved with the data set.
B. It can be used in procedures.
C. It exists only for the duration of the DATA step.
D. It can be the same as the name of a variable in the data set.
Now prepare your Base SAS and
Advance SAS Certification Exams with Online Mock tests: http://exam.sankhyana.com
For training related info kindly mail us at info@sankhyana.com
Sankhyana Consultancy Services
www.sankhyana.com
No comments:
Post a Comment